Energy saving carbon reduction descaling rust prevention environmental protection pollution-free
Energy saving carbon reduction descaling rust prevention environmental protection pollution-free
kpm.yhk@kp-magnetizing.com.tw
7F.-1, No. 111, Liulu 14th St., Shalu Dist.,(433)
Since its establishment in 1998, Kuanpeng High-Tech INC. has been committed to energy conservation, water conservation and environmental protection. Although it has been difficult along the way, the company will continue to adhere to this goal. However, the Taiwan Industrial Service Foundation (hereinafter referred to as the Industrial Service Foundation) has found from its experience in implementing green technology guidance for industries that scale is easily generated on the water side of heat exchangers in various water circulation systems. The heat transfer efficiency of the heat exchanger decreases as the thickness of the scale increases, and a large amount of energy is lost accordingly. If the scale on the heat exchanger can be completely removed during regular factory maintenance, the energy saved will be considerable.
Contact
Chabaa Bangkok Co.,Ltd.
AUO Corporation
ChaoSu Frozen Food
We sincerely welcome you. If you have any questions or information, please contact us and we will get back to you as soon as possible.
+886 928 923 541 ( 0928 923 541 )
kpm.yhk@kp-magnetizing.com.tw
Installed on diesel engine pipes and gasoline engine pipes, the oil system is magnetized through super strong magnetism. Please refer to the picture.
Fuel-type super-strong magnetic equipment can be installed on the oil pipeline before entering the combustion engine (be careful to avoid the installation location where the temperature exceeds 150°C or is in a place prone to corrosion), so that the atomized oil mist entering the engine is ionized by the effect of the magnetic field, breaking up the original tangled positive and negative ion impurities, and promoting the full mixing of carbon and hydrogen molecules in the fuel with oxygen to achieve complete combustion, increase combustion efficiency and reduce air pollution. Super Magnetic Equipment has conducted relevant performance tests. The total mileage of the tested 2,000cc passenger car is 66,727 km. The energy consumption test shows that the urban energy consumption is 11.83 km/1, the high-speed energy consumption is 16.23 km/1, and the average energy consumption is 13.5 km/1. The pollutant test shows that the CO emission is 1.25 g/km, the NOx emission is 0.45 g/km, and the THC emission is 0.20 g/km. The general fuel system is installed on the oil pipeline before the burner.
In addition to being used in engine fuel systems, super-strong magnetic equipment can also be used to remove grease from pipelines in dry room systems that use fuel oil and avoid pipeline blockages.
(EP-101-N) Fuel saving data report:
For general cars, 15%~25% must be calculated based on long-distance driving. What does 15%~25% mean? The older and heavier the car, the more fuel-efficient it is. (For example, GM series cars) Increasing horsepower means reducing black smoke. You can feel the increased horsepower immediately after installation. As for fuel saving data, the cumulative amount must be accumulated after running 1~3 barrels of oil before installation, and the data must be compared after using 1~3 barrels of oil after installation. The data for trailers, large trucks, and large buses is about 10~15%. In particular, the road conditions for large buses are mostly in urban areas, so the data is relatively small. In Shanghai, mainland China, our company's products were selected by a state-owned passenger transport company from more than ten products from six countries. The products stood out in local urban area tests based on fuel efficiency, horsepower, smoke exhaust, safety, installation convenience, etc., with an accuracy rate of 6.8%.